Moisture meter software

Moisture meter for bulk materials

The FIZEPR-SW100.10.X moisture meter VIGT.415210.100-10.X  is designed to measure the moisture of bulk materials in hoppers, dispensers and on conveyors. Controlled materials: crushed stone, gravel, sand, ore, sawdust and wood chips, as well as mixed feed, grain, flour, seeds and other agricultural products.

MOISTURE METER FOR LIQUID MATERIALS

The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc. 

The device consists of an electronic unit and a sensor.

The sensor is made as a pipe section with flanges of stainless steel. There is a probe inside the pipe made as a flat-topped stick ​​of stainless steel of the same grade.

Universal moisture meter

The dielectric moisture meter FIZEPR-SW100.11 is designed for measuring permittivity and moisture content in liquid and bulk materials. Moisture measuring range - from 0 to 100% - provides a wide area of instrument application.

Microwave barrier for level siur-03v

Whether in bulk solids or liquids – SIUR-03V detects the limit level with absolute certainty in very rough process conditions. The sensor is insensitive to dirt, dust and buildup. 

Moisture meter for concrete-mixing machines

The moisture meter FIZEPR-SW100.17.X is designed for measuring the moisture (in percentage) of liquid and bulk materials. Its main purpose is measurement of water content in the concrete mixture directly inside the concrete-mixing machine, consistency and quality control of mixture agitation and its mobility.