dieLCOMETRIC  moisture meter FOR LABORATORY RESEARCH

The laboratory dielcometric moisture meter FIZEPR-SW100.30 has a high sensitivity and accuracy of measurements, provides measurement not only of moisture but also of the complex permittivity. It can be used both for liquids and fine-grained bulk materials control.

MOISTURE METER FOR LIQUID MATERIALS

The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc. 

The sensor is made as a pipe section with flanges of stainless steel. There is a probe inside the pipe made as a flat-topped stick ​​of stainless steel of the same grade.

Moisture meter for bulk materials

The FIZEPR-SW100.10.X moisture meter VIGT.415210.100-10.X  is designed to measure the moisture of bulk materials in hoppers, dispensers and on conveyors. Controlled materials: crushed stone, gravel, sand, ore, sawdust and wood chips, as well as mixed feed, grain, flour, seeds and other agricultural products.

Влагомер древесных опилок и щепы

FIZEPR-SW100.10.x moisture meters are designed for measuring the fraction of water contained in bulk materials including in sawdust and chips. The principle of moisture meter operation is based on probing the medium with metric radio waves.

Moisture meters for high-conductivity materials[[wysiwyg_imageupload::]]

A new series of moisture analyzers (moisture meters) is designed to measure materials with high electrical conductivity such as salts, chemical sludge, sewage sludge, anthracite, ion exchange resins, etc. These analyzers can also be used to measure concentrations of salt, acid and alkali solutions.