Завершена сертификация влагомеров FIZEPR-SW100 во взрывозащищенном исполнении

Moisture meter for concrete-mixing machines

The moisture meter FIZEPR-SW100.17.X is designed for measuring the moisture (in percentage) of liquid and bulk materials. Its main purpose is measurement of water content in the concrete mixture directly inside the concrete-mixing machine, consistency and quality control of mixture agitation and its mobility.

Влагомер древесных опилок и щепы

FIZEPR-SW100.10.x moisture meters are designed for measuring the fraction of water contained in bulk materials including in sawdust and chips. The principle of moisture meter operation is based on probing the medium with metric radio waves.

Moisture meter for bulk materials

The FIZEPR-SW100.10.X moisture meter VIGT.415210.100-10.X  is designed to measure the moisture of bulk materials in hoppers, dispensers and on conveyors. Controlled materials: crushed stone, gravel, sand, ore, sawdust and wood chips, as well as mixed feed, grain, flour, seeds and other agricultural products.

Grain moisture meters

The FIZEPR-SW100 moisture meter is world's only non-nuclear moisture meter designed to measure moisture content in materials with large fraction sizes of up to 15 cm and more (ore, crushed stone, gravel, etc.).

MOISTURE METER FOR LIQUID MATERIALS

The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc. 

The sensor is made as a pipe section with flanges of stainless steel. There is a probe inside the pipe made as a flat-topped stick ​​of stainless steel of the same grade.