Спектрометр вибраций

Grain moisture meters

The FIZEPR-SW100 moisture meter is world's only non-nuclear moisture meter designed to measure moisture content in materials with large fraction sizes of up to 15 cm and more (ore, crushed stone, gravel, etc.).

Electron paramagnetic resonance spectrometer

The electron paramagnetic resonance (ESR) spectrometer is designed to measure the microwave absorption dependence of material containing paramagnetic particles on a magnetostatic field induction. The spectrometer allows registering the presence of paramagnetic centers in the material, as well as determining their concentration. In particular spectrometer can be used to measure the concentration of free radicals in solutions and dry material samples.

MOISTURE METER FOR LIQUID MATERIALS

The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc. 

The device consists of an electronic unit and a sensor.

The sensor is made as a pipe section with flanges of stainless steel. There is a probe inside the pipe made as a flat-topped stick ​​of stainless steel of the same grade.

Влагомер древесных опилок и щепы

FIZEPR-SW100.10.x moisture meters are designed for measuring the fraction of water contained in bulk materials including in sawdust and chips. The principle of moisture meter operation is based on probing the medium with metric radio waves.

 dieLCOMETRIC  moisture meter FOR LABORATORY RESEARCH

The laboratory dielcometric moisture meter FIZEPR-SW100.30 has a high sensitivity and accuracy of measurements, provides measurement not only of moisture but also of the complex permittivity. It can be used both for liquids and fine-grained bulk materials control.