Сигнализатор уровня для силосов с цементом

Universal moisture meter

The dielectric moisture meter FIZEPR-SW100.11 is designed for measuring permittivity and moisture content in liquid and bulk materials. Moisture measuring range - from 0 to 100% - provides a wide area of instrument application.

Moisture meter for bulk materials

The FIZEPR-SW100.10.X moisture meter VIGT.415210.100-10.X  is designed to measure the moisture of bulk materials in hoppers, dispensers and on conveyors. Controlled materials: crushed stone, gravel, sand, ore, sawdust and wood chips, as well as mixed feed, grain, flour, seeds and other agricultural products.

Grain moisture meters

The FIZEPR-SW100 moisture meter is world's only non-nuclear moisture meter designed to measure moisture content in materials with large fraction sizes of up to 15 cm and more (ore, crushed stone, gravel, etc.).

Moisture meters for high-conductivity materials[[wysiwyg_imageupload::]]

A new series of moisture analyzers (moisture meters) is designed to measure materials with high electrical conductivity such as salts, chemical sludge, sewage sludge, anthracite, ion exchange resins, etc. These analyzers can also be used to measure concentrations of salt, acid and alkali solutions.

MOISTURE METER FOR LIQUID MATERIALS

The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc. 

The sensor is made as a pipe section with flanges of stainless steel. There is a probe inside the pipe made as a flat-topped stick ​​of stainless steel of the same grade.