Message sent

Moisture meter for concrete-mixing machines

The moisture meter FIZEPR-SW100.17.X is designed for measuring the moisture (in percentage) of liquid and bulk materials. Its main purpose is measurement of water content in the concrete mixture directly inside the concrete-mixing machine, consistency and quality control of mixture agitation and its mobility.

Universal moisture meter

The dielectric moisture meter FIZEPR-SW100.11 is designed for measuring permittivity and moisture content in liquid and bulk materials. Moisture measuring range - from 0 to 100% - provides a wide area of instrument application.

Grain moisture meters

The FIZEPR-SW100 moisture meter is world's only non-nuclear moisture meter designed to measure moisture content in materials with large fraction sizes of up to 15 cm and more (ore, crushed stone, gravel, etc.).

MOISTURE METER FOR LIQUID MATERIALS

The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc. 

The device consists of an electronic unit and a sensor.

The sensor is made as a pipe section with flanges of stainless steel. There is a probe inside the pipe made as a flat-topped stick ​​of stainless steel of the same grade.

Microwave barrier for level siur-03v

Whether in bulk solids or liquids – SIUR-03V detects the limit level with absolute certainty in very rough process conditions. The sensor is insensitive to dirt, dust and buildup.