MOISTURE METER FOR LIQUID MATERIALS

The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc. 

The sensor is made as a pipe section with flanges of stainless steel. There is a probe inside the pipe made as a flat-topped stick ​​of stainless steel of the same grade.

Moisture meter for concrete-mixing machines

The moisture meter FIZEPR-SW100.17.X is designed for measuring the moisture (in percentage) of liquid and bulk materials. Its main purpose is measurement of water content in the concrete mixture directly inside the concrete-mixing machine, consistency and quality control of mixture agitation and its mobility.

In-line moisture meters FIZEPR‑SW100.1x are designed for monitoring grain drying in grain dryers, but are also used for measuring moisture content of grain and grain products stored in bunkers. The high operating temperature of the sensors allows them to be integrated directly into grain drying equipment.

Universal moisture meter

The dielectric moisture meter FIZEPR-SW100.11 is designed for measuring permittivity and moisture content in liquid and bulk materials. Moisture measuring range - from 0 to 100% - provides a wide area of instrument application.

Microwave barrier level sensors SIUR‑03V are designed for point‑level control of bulk material filling in bunkers. The sensors are also used as microwave blockage detectors in transfer chutes and other pipelines intended for conveying bulk materials.