Moisture meter for concrete-mixing machines

The moisture meter FIZEPR-SW100.17.X is designed for measuring the moisture (in percentage) of liquid and bulk materials. Its main purpose is measurement of water content in the concrete mixture directly inside the concrete-mixing machine, consistency and quality control of mixture agitation and its mobility.

 dieLCOMETRIC  moisture meter FOR LABORATORY RESEARCH

The laboratory dielcometric moisture meter FIZEPR-SW100.30 has a high sensitivity and accuracy of measurements, provides measurement not only of moisture but also of the complex permittivity. It can be used both for liquids and fine-grained bulk materials control.

MOISTURE METER FOR LIQUID MATERIALS

The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc. 

The device consists of an electronic unit and a sensor.

The sensor is made as a pipe section with flanges of stainless steel. There is a probe inside the pipe made as a flat-topped stick ​​of stainless steel of the same grade.

Electron paramagnetic resonance spectrometer

The electron paramagnetic resonance (ESR) spectrometer is designed to measure the microwave absorption dependence of material containing paramagnetic particles on a magnetostatic field induction. The spectrometer allows registering the presence of paramagnetic centers in the material, as well as determining their concentration. In particular spectrometer can be used to measure the concentration of free radicals in solutions and dry material samples.

Microwave barrier for level siur-03v

Whether in bulk solids or liquids – SIUR-03V detects the limit level with absolute certainty in very rough process conditions. The sensor is insensitive to dirt, dust and buildup.