Specifications
This section provides technical specifications of typical moisture meter for liquids FIZEPR‑SW100.20.
If required, Design Bureau Fizelektronpribor can adapt the moisture meter design to specific production conditions.
| Parameter |
Value |
| versions -20.x.K, -21.x.K, -24.x with salts ≤250 g/L (grams of salt per litre of water) (probe in dielectric shell) |
0.01…99.9 |
| versions -20.x, -21.x with salts ≤250 g/L (probe without shell) |
0.01…20 |
| versions -20.x, -21.x with salts ≤0.5 g/L (probe without shell) |
0.01…99.9 |
| 0…2% |
± 0.06 |
| 2…10% |
± 0.15 |
| 10…20% |
± 0.4 |
| 20…50% |
± 1.0 |
| 50…100% |
± 2.5 |
| – Version A |
−20…+120 |
| – Version B (extended range) |
−20…+145 (+180) |
| – Version A |
−20…+60 |
| – Version B (extended range) |
−40…+60 |
| |
0…+80 |
| Digital interface |
RS‑485 Modbus RTU |
| Current output, mA |
4–20 |
| Supply voltage, V: |
|
| – nominal |
24 |
| – permissible |
18…30 |
| Current consumption, mA |
≤200 |
| Electronic unit (explosion‑proof) |
IP66 |
| Sensor |
IP67 |
| Length of connecting cable between sensor and electronic unit, m |
1.5…4 (specified upon order) |
| Max. RS‑485 cable length to external device, m |
1000 |
| Max. 4–20 mA cable length to external device, m |
1000 |
Standard delivery set
The moisture meters FIZEPR‑SW100 for oil and petroleum products are supplied with the following standard delivery set:
| Item No. |
Description |
Quantity |
| 1 |
Sensor VIGT.415210.100‑2х.x (version as per order) |
1 pc. |
| 2 |
Explosion‑proof electronic unit VIGT.415210.101‑02 |
1 pc. |
| 3 |
Technical description and operation manual VIGT.415210.100 РЭ |
1 pc. |
| 4 |
Passport VIGT.415210.100 ПС |
1 pc. |
| 5 |
USB flash drive with technical documentation and software |
1 pc. |
| 6 |
Mating flanges |
set |
English
Русский
