Tel/Fax: +7 (846) 359-17-01
info@fizepr.com, fizepr@gmail.com

Download catalogues and price lists

FIZEPR-SW100 moisture meters for bulk and paste-like materials

Moisture meters for crude oil, petroleum products and other liquid materials; for steam-water environment measurements

Microwave barrier level sensors SIUR-03V

Our customers

From the date of establishing in 1993, Design Bureau “Fizelektronpribor” has implemented more than 80 process automation projects at various Russian industrial plants. A lot of plants including foreign ones use our instruments.

Among our customers:

Company news

Moisture meter for drywall and other sheet materials on conveyors

December 5 2022 г.

FIZEPR-SW100.15.1 is a moisture meter designed for non-contact measurements of moisture content in drywall, fiberboard, chipboard, medium density fiberboard plates and other sheet materials on a conveyor line. This moisture meter can also be used to measure moisture content in timber.

The moisture meter sensor has an operating temperature of +180ºС, so it can be used in drying chambers.

Details ...

Measurement of moisture in crude oil with a high gas volume content

October 18 2020 г.

For all existing crude oil moisture meters, the metering error increases when gas appears in oil. For most of them, when gas volume content exceeds 2 - 5%, the metering error becomes unacceptable.

A solution has been found specifically for FIZEPR-SW100 series in-line moisture meters to ensure accurate crude oil moisture measurement even with a high gas volume content. The solution is shown in the figure.

Details ...

CONCENTRATION ANALYZERS FIZEPR-SW100 OF ACIDS, ALKALIS AND SALTS

March 15 2019 г.

The new series analyzers designed for measuring concentrations of salt, acid and alkali solutions is put into production. Analyzers can also be used as moisture meters, but they can also measure materials with high electrical conductivity, such as anthracite, sewage sludge, ion-exchange resins (ion-exchange polymer), etc. Analyzers are used for in-line control of materials as well as for measurements in tanks and laboratory studies.

Details ...

Вопрос и ответ 444

Is temperature compensation provided in the moisture meter?

Related to:

Dielcometric moisture meter FIZEPR-SW100.30 for laboratory research

Moisture meter FIZEPR-SW100.10.X for bulk materials

Moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.24, -SW100.12 for liquid materials

Universal moisture meter FIZEPR-SW100.11

Reply:

There is a thermocouple inside the probe. Therefore all calibrations are referenced to the temperature.

It should be noted that the method of measurement used is based on permittivity measurement. And compared to attenuation measurements at microwave frequencies the results less depend on temperature.