Moisture meter FIZEPR SW100.10 for bulk materails

Moisture meter FIZEPR-SW100.10.5 for bulk materials on transporter

Moisture meter FIZEPR-SW100.30.2 for bulk and paste-like materials in laboratory researchs

Moisture meter FIZEPR-SW100.10.21 for bulk materials

Moisture meter for
bulk materials
FIZEPR-SW100.10

Get a quote

+7 (846) 925-63-53

Tel/Fax: +7 (846) 359-17-01
info@fizepr.com, fizepr@gmail.com

Download catalogues and price lists

FIZEPR-SW100 moisture meters for bulk and paste-like materials

Moisture meters for crude oil, petroleum products and other liquid materials; for steam-water environment measurements

Our customers

From the date of establishing in 1993, Design Bureau “Fizelektronpribor” has implemented more than 80 process automation projects at various Russian industrial plants. A lot of plants including foreign ones use our instruments.

Among our customers:

Company news

Moisture meter for drywall and other sheet materials on conveyors

December 5 2022 г.

FIZEPR-SW100.15.1 is a moisture meter designed for non-contact measurements of moisture content in drywall, fiberboard, chipboard, medium density fiberboard plates and other sheet materials on a conveyor line. This moisture meter can also be used to measure moisture content in timber.

The moisture meter sensor has an operating temperature of +180ºС, so it can be used in drying chambers.

Details ...

Measurement of moisture in crude oil with a high gas volume content

October 18 2020 г.

For all existing crude oil moisture meters, the metering error increases when gas appears in oil. For most of them, when gas volume content exceeds 2 - 5%, the metering error becomes unacceptable.

A solution has been found specifically for FIZEPR-SW100 series in-line moisture meters to ensure accurate crude oil moisture measurement even with a high gas volume content. The solution is shown in the figure.

Details ...

CONCENTRATION ANALYZERS FIZEPR-SW100 OF ACIDS, ALKALIS AND SALTS

March 15 2019 г.

The new series analyzers designed for measuring concentrations of salt, acid and alkali solutions is put into production. Analyzers can also be used as moisture meters, but they can also measure materials with high electrical conductivity, such as anthracite, sewage sludge, ion-exchange resins (ion-exchange polymer), etc. Analyzers are used for in-line control of materials as well as for measurements in tanks and laboratory studies.

Details ...

Technical data

You can find here technical specifications of the moisture meter FIZEPR-SW100.10 (VIGT.415210.100-10) for liquid materials in the typical configuration. All of our equipment could be customized to your specific needs on request.

Download FIZEPR-100 datasheet

No.	Parameter	Value
1	Moisture measurement range (the ratio of weight of water contained in the mixture to mixture weight)	0…100%
2	Absolute error of moisture measurement: in a moisture range of 0…6% in a moisture range of 6…8% in a moisture range of 8…10% in a moisture range of 10…20% in a moisture range of 20…50% in a moisture range of 50…100%	0.3% 0.4% 0.5% 1% 2.5% 5%
3	Permittivity measurement range	1…100
4	Range of sensor operational temperatures	-20…145°С
5	Calibration measurement range of sensor	5…80°С
6	Range of electronic unit operational temperatures	-20…80°С
7	Measurement period	1sec
8	Output interface digital current	RS485 Modbus RTU 4 – 20mА
9	Electronic unit supply voltage: nominal allowable	24V 18...36V
10	Current consumption, not more than	200mА
11	Dust and moisture ingress protection rating of electronic unit	IP54 group according to IEC 60529
12	Dust and moisture ingress protection rating of sensor	IP65 group according to IEC 60529
13	Length of communication cable between sensor and electronic unit	2…4m (specified when ordering)
14	Maximum allowable length of cable transmitting RS485 digital signal from the electronic unit to an external control device (controller, computer), not less than	1000m
15	Maximum allowable length of cable transmitting 4-20mА analog signal from the electronic unit to an external indicating device (measuring and regulating device), not less than	100m

Package contents

No.	Product description	Quantity
1	Electronic unit VIGT.415210.101	1 pc
2	Sensor VIGT.415210.102 (assembled)	1 pc
3	Panel VIGT.415210.128 (with coupling holders VIGT.415210.121 and VIGT.415210.122)
4	Product specification and operation manual VIGT.415210.100RE	1 pc
5	Equipment certificate VIGT.415210.100PS	1 pc
6	CD with software	1 pc