In-line moisture meters FIZEPR‑SW100.1x are designed for monitoring grain drying in grain dryers, but are also used for measuring moisture content of grain and grain products stored in bunkers. The high operating temperature of the sensors allows them to be integrated directly into grain drying equipment.

Microwave barrier level sensors SIUR‑03V are designed for point‑level control of bulk material filling in bunkers. The sensors are also used as microwave blockage detectors in transfer chutes and other pipelines intended for conveying bulk materials.

Sawdust and chip moisture meters

FIZEPR-SW100.10.x moisture meters are designed for measuring the fraction of water contained in bulk materials including in sawdust and chips. The principle of moisture meter operation is based on probing the medium with metric radio waves.

MOISTURE METER FOR LIQUID MATERIALS

The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc. 

The sensor is made as a pipe section with flanges of stainless steel. There is a probe inside the pipe made as a flat-topped stick ​​of stainless steel of the same grade.

Moisture meter for bulk materials

The FIZEPR-SW100.10.X moisture meter VIGT.415210.100-10.X  is designed to measure the moisture of bulk materials in hoppers, dispensers and on conveyors. Controlled materials: crushed stone, gravel, sand, ore, sawdust and wood chips, as well as mixed feed, grain, flour, seeds and other agricultural products.